Skip to content
Balmain 2041

Rising Damp in Balmain

Damp courses, tanking and salt-resistant replastering for Balmain's sandstone cottages and terraces.

Get a free quote

Takes a minute. A local damp specialist will call you back.

No obligation. Your details only go to one local damp specialist.

Rising damp in Balmain homes

Balmain is one of Sydney’s oldest suburbs, and its houses show it: early sandstone cottages near the water, rows of Victorian terraces up the ridge along Darling Street, and timber workers’ cottages squeezed onto steep, narrow blocks. Many date from the mid 1800s, built on sandstone with lime mortar and no damp course at all. On top of that, the peninsula’s slopes mean many homes have walls cut into the ground.

What we usually find in Balmain

Balmain damp comes in two forms. On flatter blocks, it is classic rising damp: water drawn up through brick and stone walls, leaving tide marks, salt and flaking paint along the bottom of the walls. On sloping blocks, especially towards the water at Birchgrove and Balmain East, lower-ground rooms and rear walls sit against soil or rock, and water seeps through them from the side.

Old sandstone walls also hold a lot of water and salt. Where they have been cement rendered or painted with acrylic over the years, the moisture can’t escape and damage climbs well above the floor.

How we treat Balmain homes

We test each wall separately, because a single Balmain house can need several methods. Brick walls with sound mortar usually get a chemical damp course. Walls against the ground get waterproof tanking on the inside face, with drainage outside where it can be fixed. Salt-laden plaster comes off and is replaced with a salt-resistant render that suits old masonry.

Much of Balmain is a heritage conservation area, so we keep original stone and brick wherever possible, and match mortars to the age of the wall.

Before you book

If you’ve noticed mould on walls in a lower room or salt crystals on sandstone, point them out at the inspection. It’s free, with a written fixed-price quote. We also work in Birchgrove, Balmain East and Rozelle.

Updated

Why choose us

Why use us

Built for old walls

Solid brick, sandstone footings and lime mortar are what we work on every week, so the treatment is chosen for the wall, not the other way round.

Cause first

We measure moisture and check drainage, ground levels, leaks and ventilation before recommending a damp course, so you only pay for what fixes the problem.

Fixed-price quotes

You get a written, fixed-price quote after the inspection, with no obligation to go ahead.

FAQs

Frequently asked questions

Can rising damp be treated in a sandstone wall?

Yes, but sandstone walls need care. Solid dressed sandstone can often be injected, while rubble-filled walls may suit a cut-in membrane or a different approach. We assess each wall at the inspection.

Why is my lower-ground room in Balmain always damp?

Many Balmain homes step down the slope, so the back or side walls of lower rooms sit against the ground. Water there comes through the wall from the side, not up from below, and needs tanking and drainage rather than a damp course alone.

Which councils do you work in?

We work across Inner West Council, the City of Canada Bay, Burwood, Strathfield, and the Inner West parts of the City of Sydney and Canterbury-Bankstown.

Ready to get it quoted?

Get a fast, free quote from a local damp specialist. No obligation.

📞 Call now Free quote